Javascript DHTML Drop Down Menu Powered by dhtml-menu-builder.com
Right and left tenons are accomplished at a tie.

 

 

 

 

YC-TF2 Single Sided Cutting Boring Moulding Machine
►►

 

YC-TF2

Especially ideal for producing tenons for door frame, picture frame, table top frame and cabinet frame etc. Also, ideal for producing 45˚ angular tenons.

 

Right and left tenons are accomplished at a tie.

 

Outstanding Features:

  1. TF2: Right and left tenons are accomplished at a time.
  2. The machine employs a PLC control for easy operation and smooth motion sequence.
  3. Foot Switch controls motion cycle.
  4. Combine three functions in one;cutting,moulding and boring.
  5. Table surface is equipped with a miter gauge for bevel moulding.
  6. Entire motions are actuated by air/hydraulic combination cylinders,providing fast, stable and smooth motions.
  7. Table tilts 30˚ front downward.
  8. The table support is fitted with oilless bushings.
45° Miter Fence
  • The table is equipped with a 45°miter fence, allowing for cutting, boring and moulding operations. Right and left 45°angular tenons can be accomplished at a time.

Air Clamp

  • The workpiece is clamped by air cylinder for convenient and fart clamping and unclamping.
Variable Workpiece Feed Speed
  • The machine employs two speed regulator knobs to adjust the table feed forward and backward speeds. permitting workpiece contacting cutter smoothly.
  • Variable feed speed makes the machine ideal for cutting hard and soft wood.
Moulding Unit
  • The moulding units consists of two spindles.
  • One spindle is fixed, while the other spindle can be adjusted in height position.
  • The moulding unit is equipped with a seethru guard to prevent chips from splashing.
Boring Unit
  • The boring unit is driven by a 3 HP motor.
  • One 5-spindles boring head is standard equipment.
    Other types of boring head are available upon request.
  • The boring unit moves on high precision linear guide ways for smooth trowel and high linear accuracy.
  • Boring head stroke is adjustable.
Centralized Control Panel
  • All motion controls of the machine are completely centralized on a control panel, providing operational convenience for operator.
     
   
Table Driven by Servo (optional)
  • Upon customer's requirement, the table movement can be driven by a 1 kw servo motor. This combined with ball screw transmission to exhibit features of fast movement and high positioning accuracy.
  • Strokes per minute may reach 6 times. (Standard strokes per minute is 4 times)
   
Model YC-TF2
Cutting unit  
Spindle motor (1) 3 HP
Blade size 450 mm
Spindle speed 2800 RPM
Boring unit
Spindle motor (1) 3 HP
Boring 34 mm (4-spindles boring head)
Spindle speed 2800 RPM
Depth adjustment 70 mm
Moulding
Spindle motor (2) 5 HP
Spindle diameter (2) 35 mm
Spindle speed 8000 rpm/min
Total horsepower 12 kw (16 HP)
Working air pressure 6 kg/cm²
Dust hood outlet diameter ø4" x 5
Machine dimensions (LxWxH) 2020x1630x1300 mm
Packing size (LxWxH) 2070x1730x1500 mm
Net / Gross weight 1900/2000 kg
• Specifications and design characteristics are subject to change without prior notice.